Definitions and notes

Engine dimensions

A* - Total length of the engine when the turbocharger is located at the flywheel end.
A - Total length of the engine when the turbocharger is located at the free end.
B - Height from the crankshaft centerline to the highest point.
B* - Height from the crankshaft centerline to the highest point when the turbocharger is located at the flywheel end.
C - Total width of the engine.
C* - Total width of the engine when the turbocharger is located at the flywheel end.
D - Minimum height from the crankshaft centerline when removing a piston.
F - Distance from the crankshaft centerline to the bottom of the oil sump.

 

Dimensions and weights

  • Dimensions are in millimeters and weights are in metric tonnes.
  • Indicated values are for guidance only and are not binding.
  • Cylinder configurations: L = in-line and V = v-form.

 

Specific fuel energy consumption

  • At ISO standard reference conditions at 85% load
  • Lower calorific value of fuel 42 700 kJ/kg
  • Tolerance 5%
  • With engine driven pumps
  • Natural gas
  • Methane number min. 80
  • Lower heating value min. 28 MJ/Nm3
  • Gas pressure 5.5 bar

 

ISO standard reference conditions

Total barometric pressure: 1.0 bar
Suction air temperature: 25 °C
Charge air, or scavenge air, cooling water temperature: 25 °C
Relative humidity: 30%