Wärtsilä Auxpac 16

The Auxpac 16 is Wärtsilä’s smallest Auxpac generating set and is based on years of experience and our proven technology.

    Advantages

    The Auxpac 16 is available as 5, 6 or 7 cylinder configuration. It comes equipped with a built-in, multi-functional, digital automation system that has an integrated electronic governor to ensure smooth control and fast response to load transients. All Wärtsilä Auxpac generating sets are designed to be installed resiliently to the ship’s hull. The resilient installation method enables easy installation and alignment of the generating set within the vessel. The advantage over conventional mounting methods is that it notably reduces the structure-borne noise transmitted from the generating sets to the ship’s hull, thus improving on-board comfort levels. The resilient installation method also works the other way, protecting a gen-set in stand-by, from harmful vibration originating from the main engine

    Typical application areas
    While the Auxpac 16 has been designed as an auxiliary engine for a variety of vessel types, it is especially suited for providing power to small tankers, bulkers, multi-purpose vessels and small container vessels.

    Operational features
    The Wärtsilä Auxpac 16 is able to operate on different fuels, ranging from the lowest LFO viscosity of 2.0 cSt to an HFO viscosity of 700 cSt (at 50°C). The engine is also able to use low and ultra low sulphur fuel oils (<0.01% S) as per the standards set by authorities for fuel oil used in emission controlled areas.

    Environmental compliance
    The engine is fully compliant with IMO Tier II requirements and, when fitted with exhaust gas after treatment solutions, will reach IMO Tier III compliance.

    A16 - rated power, dimensions (mm) and weights (tonnes)

    60 Hz
    /1200 rpm
    Output
    (kWe)
    Length
    (A)
    Width
    (E)
    Height
    (L)
    Weight
    (Tonnes)
    525W5L16 525 4530 1400 1960 9.8
    630W6L16 630 4787 1400 1960 10.8
    735W7L16 735 5050 1400 1960 11.8
    50 HZ
    /1000 rpm
    Output
    (kWe)
    Length
    (A)
    Width
    (E)
    Height
    (L)
    Weight
    (Tonnes)
    455W5L16 455 4530 1400 1960 9.8
    545W6L16 545 4787 1400 1960 10.8
    635W7L16 635 5050 1400 1960 11.8
     
    Auxpac dimensions
    Pre-engineered medium-speed generating sets

    Wärtsilä Auxpac generating sets are available in a selected range as pre-engineered and pre-commissioned auxiliary generating sets. The common baseframe is optimised for the package, which together with the compact design of the engine and the selected generator, offers unmatched power-to-space and power-to-weight ratios. Other benefits of pre-engineering include readily available documentation, which also includes models in Tribon® format, and short lead-times.

    Main data 60 Hz 50 Hz IMO Tier II or III
    Voltage 450 V 400 V Fuel oil specification:
    700 cSt/50°C,
    7200 sR1/100°F,
    Protection Class IP 23, IP 44* IP 23, IP 44* ISO 8217, cat. ISO-F-RMK 55
    T° rise& isolation Class F Class F
    Cooling Air, water* Air, water* * in option


    Marine solutions drawings
    Auxpac W6L16

    Conditions for use
    The 2D and 3D models and drawings downloaded (”Marine Solutions Drawings”) are for general guidance purposes only and should not be used for actual projects. Models and drawings for specific projects must be obtained from the appropriate Wärtsilä personnel as there may be deviations from the Downloadable Files.

    File formats
    File formats supported include DXF and PDF for 2D models and IGES, STEP, DXF, SAT and WRML for 3D models. A 2D DXF or PDF should always be used to support the 3D models. The Downloadable Files are subject to changes or improvements by Wärtsilä without notification so please check regularly for new and updated files at www.wartsila.com.

    Liability
    Wärtsilä takes no responsibility for and disclaims any liability for the contents of the Downloadable Files, including but not limited to omissions, errors, deficiencies, inaccuracies contained therein, and the use or misuse thereof. In no event, shall Wärtsilä be liable for any consequential, special, contingent, or incidental damages or injury, financial or otherwise, suffered by any party arising out of, connected with, or resulting from the use of the Downloadable Files or the information contained therein.

    Copyright
    This website contains information, which is owned by or licensed to Wärtsilä. Wärtsilä shall retain all rights, including copyrights, relating to the information in the Downloadable Files. Reproduction or transmission to third parties is prohibited without prior written approval of Wärtsilä. Copyright © Wärtsilä.

    Legal and Privacy notice
    http://www.wartsila.com/en/legal-privacy

    Related press releases

    Articles

    Expanding Wärtsilä’s Auxpac engine portfolio

    The market for auxiliary marine engines has been in decline, but there are already signs of a recovery. Market analysts are predicting that this recovery will continue and accelerate during the coming years.
    22 April 2014
    • In Detail article

    Related services

    Contact us

    Please fill in the form if you have an enquiry related to GENERATING SETS. Fields indicated with an asterisk (*) are required.

    Find your local Wärtsilä office
    © 2016 Wärtsilä