Wärtsilä High Voltage Training Breaker

High Voltage Training Breaker is a high voltage training solution for marine engineering and electrical training. A real hardware high voltage generator breaker cabinet was developed in partnership with ABB power technology specialists to meet the recently introduced STCW requirements, such as mandatory high voltage training on real equipment. The breaker is compatible with the ERS 5000 TechSim simulators with high and medium voltage systems. 

    Training objectives
    • Realistic hands-on training in high voltage switchboard operations
    • Understanding safety as a personal responsibility
    • Electricity and work planning
    • Identification of hazards
    • Emergency procedures and contacts/location of emergency gear
    • Knowledge of circuits/power feeds/emergency shutdown and isolation devices
    • Familiarisation with company protocols
    • Isolation of breakers in ships’ electrical systems
    • Use of high voltage test equipment
    • Use of high voltage Personal Protective Equipment (PPE)
    • Definition and identification of circuit condition/energised work conditions
    • Practical assessment of personnel and assignment of work/qualification of a worker.
    Equipment supplied
    • The breaker is compatible with the existing Wartsila TechSim simulators with high/medium voltage systems.
    • High voltage distribution systems can be used in several ship types:
      • DE Cruise ship
      • Steam Turbine LNG Carrier
      • DE LNG Tanker.
    • The breaker can also be attached to a single PC running TechSim providing a standalone trainer.
    • Breaker Removal Tools
    • Test Equipment
    • Personal Protective Equipment (PPE)
    Simulator Interface

    The lower part of the breaker comprises a real breaker operated by the simulator electrical system mathematical model. The upper panel contains the instruments and controls for a typical high voltage generator. The controls and instruments are connected to the simulator model via a digital analogue interface. 

    To simulate LCD type Power Management System controllers, a precisely developed small touch screen display simulates the controller functionality. 

    The simulator is connected to the breaker using a Wago COTS automation interface which may also be used for automation training. The bus ties and generator breakers are installed in the main switchboard and are normally ‘front loading’ Vacuum Circuit Breakers. The electrical systems are of common design and operate at the following voltages:

    • Up to 6600 v
    • 3 phase
    • 60 hz
    • Generators 3350 to 4000 kw

    High Voltage Training Breaker is designed to meet the training requirements set out in Section A-III/1, A-III/2, A-III/6 & B-III/2 of the STCW Code 2010 (Manila Amendments).


    High Voltage Training Breaker provides:

    • Real ABB Breaker
    • Student operator station
    • Instructor station
    • Large touch screen MIMIC for instruction and demonstration

    Related products

    Contact us

    Please fill in the form, we aim to respond within 1-2 business days depending on the enquiry. For an existing installation, provide all necessary details to identify the installation and the equipment. Fields indicated with an asterisk (*) are required. 

    Find your local Wärtsilä office here

    Contact our 24/7 customer support at +46 771 460 100 for assistance with equipment by Wärtsilä Voyage.
    You can also contact us by email at voyage.support@wartsila.com for general requests, or voyage.spares@wartsila.com for spare parts requests.

    Please email us with the Equipment Serial Number or the name of the vessel. Equipment Serial Number is taken from the equipment nameplate and includes all letters and numbers as given on the equipment nameplate.
    © 2021 Wärtsilä