Escope-slider
Thank you!

We appreciate your interest in Wärtsilä solutions. Based on your selections we have collected relevant information and material on this page.

We appreciate your interest in Wärtsilä's solutions. Please have a look at the material provided below. These are suggestions and recommendations from us. We hope that this can be the basis for further discussions and eventually a proposal for you.

This is how a power plant could look based on your selections

Power plant visualisation

Here is a visualisation of a power plant that is of similar size as you selected (click on the image to view full screen). When we deepen our discussions we can provide a layout visualisation that is according to the exact specifications of your power plant project.

Suggested range of engines

Suggested range of engines

Based on your selections we suggest that you familiarize yourself with our range of gas engines. Once we have a deeper understanding of your power plant needs we can further define which specific engine model is most suitable for your power plant project.

The main products in our gas engine range are presented here: 

Wärtsilä 34SG (ca 10MW unit) - agility and flexibility combined with high efficiency over the whole load range and in any operating profile makes this plant excellent for both flexible baseload and peak load, and supporting the grid with a variety of ancillary services.

Read more about Wärtsilä 34SG

Wärtsilä 31SG (ca 11 MW unit) - this is the newest and most efficient gas engine we offer. Wärtsilä 31SG takes efficiency to a new level for internal combustion engines.

Read more about Wärtsilä 31SG

Wärtsilä 50SG (ca 18MW unit) - High efficiency in a small footprint combined with high reliability and flexibility makes this solution perfect for flexible baseload applications including daily starts and stops, also providing ancillary services like regulation up&down and tertiary reserves.

Read more about Wärtsilä 50SG

Customer references

Wartsila power plant - Cheong Soo - South Korea
The purpose of the Cheong Soo trigeneration plant is to provide district heating and electricity to a suburban area covering approximately three square kilometres with about 6400 households and public buildings. The first phase of the project comprised two Wärtsilä 20V34SG natural gas-fuelled generating sets equipped with a heat recovery system for district heating purposes. Phase 1 was commissioned and handed over in February 2010. The second phase consists of an identical genset to the previous and was completed in 2015. The three gensets generate electricity in parallel with the electrical grid and supply district heating to the town network. During the warm summer periods the plant provides district cooling as well. Due to tariff policy in South Korea, selling only electrical power to the grid is not feasible. At night, the electrical load in the suburban area is so low that the amount of heat generated by the engines at this time is significantly reduced compared to daytime. Unfortunately, the amount of heat needed by households during this period of time in the 24-hour cycle is at its maximum. This is why installing a heat accumulator comes into question: it allows the Cheong Soo plant – operating essentially in island mode – to run continuously on high load and thus, at high levels of total efficiency (more than 85% in this case). The additional heat generated during daytime is partly stored in the accumulator for use during the following night.

Read the full story here (pdf)!
Name: Cheong soo
Type: Wärtsilä 34SG gas trigeneration power plant
Location: Cheong soo, South Korea
Owner: JB Enertek Co., Ltd (IPP)
Delivered: 2010 & 2015
Engines: 2 x Wärtsilä 20V34SG & 1 x Wärtsilä 20V34SG



    Challenge
    Solution
    Benefits

    More about flexible engine technology

    More about flexible engine-technology

    Wärtsilä offers a wide range of flexible engine power plant solutions that can provide baseload availability or support an optimised transition to renewable energy.

    Read more about our engine power plants

    Wärtsilä EPC know-how available for you!

    Wärtsilä EPC know-how

    Wärtsilä’s wide range of project service options offer an unbeatable advantage to any power plant project. With 30 years of experience from projects in more than 90 countries, we can prove that our project management, engineering, procurement, installation and construction, logistics and commissioning services are of the highest quality and lowest risk.

    Read more about project services

    Wärtsilä services as your partner in power plant operations and maintenance

    Wärtsilä services as your partner in power plant operations and maintenance

    An operation & maintenance solution with Wärtsilä means entering into a partnership, agreeing on and working towards shared productivity and profitability goals for your company.

    Customer benefits:

    • Wärtsilä responsible for operation & maintenance
    • Lifecycle cost guarantee
    • Risk management
    • Optimised operation and ensured performance
    • Maximised productive lifetime of the installation
    • Maximised return on investment
    • Latest information on product development and technical upgrades

    Read more about our operations and maintenance services

    Thank you! We appreciate your interest and time. If you want to learn more about the solutions we offer please visit www.wartsila.com/energy. If you want to download more material you can visit our downloads section.