The technology group Wärtsilä and Mitsubishi Heavy Industries Marine Machinery & Equipment Co., LTD (MHI-MME) have signed a Memorandum of Understanding (MOU) regarding the commercial marketing of a new energy solution for ships. The solution combines innovative technologies from both companies to produce greater power generation capacity and higher propeller propulsion for marine vessels.
By integrating MHI-MME’s waste heat recovery system and energy saving power generation system (WHRS) with Wärtsilä’s operational control technology for shaft generator systems, the new solution results in more energy efficient ship navigation and an improved Energy Efficiency Design Index (EEDI).
A notable innovation is the combining of a power take off/take in (PTO/PTI) shaft generator system with the WHRS to improve the stability of the WHRS. Depending on the load of the main engine and the ship’s network, the WHRS sometimes produces electrical energy in excess of that needed by the network. Such energy can be utilised via the PTO/PTI generator and at full load, the surplus energy can be used to assist the ship’s drive by being applied directly to the propeller shaft. At low main engine load, the WHRS can be operated in parallel with a diesel generator set. Parallel operation with a shaft generator via PTO operation is also easily implemented.
The patented design connects the WHRS generator into the DC link circuit of the PTO/PTI shaft generator rather than directly into the mains. This allows operation of the WHRS at reduced speed to create higher efficiency of the turbine system at part load. In so doing, it avoids the necessity of speed regulation valves, which cause throttle or bypass losses.
“When two technology leaders combine their fields of expertise, as is the case here, a solution can be created that raises efficiency to a new level. This will produce obvious benefits for ship owners and operators, and we are proud to be cooperating with Mitsubishi in this exciting development,” says Peter Rogers, Director, Power Conversion, Wärtsilä Marine Solutions.
“We are moving forward various energy-saving technologies and can expand our portfolio with this new solution, which we are quite convinced will satisfy present market demands for increasing environmental awareness. We wish to thank Wärtsilä for its high-quality collaboration that has made it possible,” says Tomoo Kuzu, Executive Vice President of MHI-MME.
The new energy solution is expected to be relevant to various kinds of vessels, such as container ships, bulk transporters, product car carrier and tankers.
Read more about Wärtsilä shaft generators
Link to an image
Caption: A shaft generator system with an integrated turbo generator featuring the waste heat recovery system.
Media contacts:
Mr Peter Rogers
Director, Power Conversion
Wärtsilä Marine Solutions
Tel: +49 4088 2520 76
peter.rogers@wartsila.com
Ms Marit Holmlund-Sund
Senior Manager Marketing, Communications, Marine Solutions
Wärtsilä Corporation
Tel: +358 10 709 1439
marit.holmlund-sund@wartsila.com
Wärtsilä in brief:
Wärtsilä is a global leader in advanced technologies and complete lifecycle solutions for the marine and energy markets. By emphasising sustainable innovation and total efficiency, Wärtsilä maximises the environmental and economic performance of the vessels and power plants of its customers. In 2016, Wärtsilä's net sales totalled EUR 4.8 billion with approximately 18,000 employees. The company has operations in over 200 locations in more than 70 countries around the world. Wärtsilä is listed on Nasdaq Helsinki.
www.wartsila.com