Combustion Engine vs Gas Turbine: Fuel Flexibility

Power plants that can reliably operate on a variety of gaseous or liquid fuels provide energy security in the event of fuel supply disruptions. Wärtsilä multi-fuel engines can instantaneously switch fuels while maintaining full output and high efficiency. This flexibility provides a key advantage over gas turbines which have reduced availability and output when running on fuel oils. With fuel flexibility, Wärtsilä power plants can meet evolving dispatch needs and agilely respond to changes in fuel availability.

Energy security has become a significant concern for many countries around the world. Potential threats include geopolitical instability, highlighted by the Ukraine-Russia conflict, fuel supply disruptions and surging fuel costs. High natural gas prices in Europe have impacted the economic viability of gas turbines with more than 20GW of combined cycle gas turbine capacity idled or planned for retirement. Despite abundant shale gas reserves, the U.S. has experienced regional price spikes from gas supply bottlenecks. In the Middle East where natural gas accounts for 60 percent of power generation,disruptions to the Arab Gas Pipeline have stressed electric power systems. Fuel shortages, supply interruptions and price constraints – even if only temporary – pose considerable economic and electric reliability risks. To mitigate fuel risk, some countries are now specifying multi-fuel capability for new power plants, recognizing that fuel flexibility is vital for ensuring a dependable source of electricity.

22 January 2015

Flexicycle™ power plants

Combining the advantages of a flexible simple cycle plant with the superb efficiency of a combined cycle.
23 July 2015

Achieving energy security

The role of fuel flexibility and low water use
31 January 2015

Gas & multi-fuel power plants (PDF)

Find in-depth info about our gas and multi-fuel power plant solutions in this brochure

What is Fuel Flexibility?

Fuel flexibility is the ability to burn a variety of fuels and immediately switch fuels during operation without reducing load or sacrificing power plant availability. Liquid fuels that can be used for electric power generation include crude oil, residual fuel oils (RFO), and distillate fuels including light fuel oils (LFO), naphtha and diesel. However, not all power plants are designed to run on liquid fuels for extended periods of time. When natural gas shortages cause gas turbines to burn fuel oil as backup, additional inspection and maintenance is required, resulting in more frequent outages. Wärtsilä combustion engines are designed to burn a variety of gaseous and liquid fuels without incurring increased maintenance or reducing availability, providing an efficient reliable power supply 24/7/365.

While gas turbines are often advertised as having fuel flexibility, about 90 percent of gas turbines worldwide operate on natural gas or liquefied natural gas (LNG) because of its purity and ease of combustion. Only about 400 GE gas turbines globally operate on crude, naphtha or heavy fuel oils. The fleet of Wärtsilä plants with fuel oil capability includes over 4000 plants encompassing 8900 engines in 165 countries, as shown in Figure 1. A number of Wärtsilä power plants were designed to operate on liquid fuels while natural gas infrastructure was built or expanded, leveraging multi-fuel capability to meet both short-term and long-term power needs.

Combustion Engine vs Gas Turbine Fuel Flexibility

Figure 1: Extensive Global Fleet of Wärtsilä Power Plants Operating on Fuel Oils


Maintenance Issues for Gas Turbines Operating on Fuel Oils

Liquid fuels present many challenges for gas turbines because they can contain water-soluble salts, high concentrations of heavy metals and other impurities. Crude and residual oils are more viscous and contain higher concentrations of trace metals than distillates. Metals and salts are abrasive to turbine blades and can create ash deposits which lead to fouling and corrosion in hot gas path components. Because combustion occurs continuously in gas turbines, the unit must be taken offline for inspection and maintenance. A combination of fuel conditioning (cleaning, blending, heating and pressurization) and more frequent maintenance cycles are required for gas turbines running on fuel oil. Catalysts may be added to improve combustion, and in some cases, heavy fuel oils (HFO) or crude may be blended with higher purity liquid fuels to achieve permissible sulfur, ash and metals content. Fuels containing vanadium or lead, which are oil-soluble and cannot be removed by washing or centrifuging, require corrosion inhibitors for use in gas turbines. Generally distillate fuels are considered to be relatively free of contaminants, but contamination during fuel transportation and delivery has led to occurrences of corrosion in gas turbines.

Overhauling a gas turbine that was designed for natural gas to burn liquid fuels is costly and requires adjustment of the firing temperature control, revised startup and shutdown procedures, and offline cleaning cycles to remove ash deposits. As a result, the availability of the gas turbine power plant is decreased. Because certain fuel oils contain volatile components with low flash points (such as naphtha), explosion protection is also often required for gas turbines. Thus, the ability of most gas turbines to operate on liquid fuels is very limited, in terms of the characteristics of fuels oils that can be used and the amount of time the turbine can operate on such fuels.

Liquid fuel options for gas turbines vary by manufacturer and model, with some gas turbines only able to use No. 2 distillate. Multiple fuel delivery systems and combustors are employed to accommodate different fuels. GE offers an HFO package for their 7E and 9E gas turbines; the Siemens SGT-500 gas turbine can burn crude, HFO and bio-oils; and Alstom offers fuel oil capability on their GT24 and GT26 models.

Wärtsilä engine maintenance is not affected by fuel type as the engines are not sensitive to metals or salts in fuel oils. No corrosion inhibitors are needed and only minimal fuel conditioning (centrifugal separators and filters) is required to burn lower quality fuels including HFO/RFO and crude. Because combustion occurs intermittently in combustion engines with the expulsion of combustion products during the exhaust stroke, the buildup of ash deposits is prevented.

While the use of ash-forming fuels (such as HFO) reduces gas turbine output by 4 to 5 percent compared to natural gas operation, Wärtsilä multi-fuel engines retain the same output and high efficiency whether running on natural gas, LFO or HFO. If the natural gas supply is interrupted, a Wärtsilä multi-fuel power plant instantaneously switches to a backup fuel oil and maintains load without incurring any maintenance penalty. When routine maintenance is required, the modular architecture of Wärtsilä power plants allows an engine to be taken offline while maintaining the bulk of plant output.

Wärtsilä offers two different types of multi-fuel engines: dual-fuel (DF) engines and gas-diesel (GD) engines. Wärtsilä 34DF and 50DF engines use lean-burn combustion technology when operating on gas and a normal diesel process when operating on fuel oil. Wärtsilä DF engines have three fuel delivery systems that work in parallel: a pilot fuel injection system, a liquid fuel supply, and a gas admission system. The liquid backup fuel system allows the engine to transfer automatically and instantaneously from gas operation to liquid fuel operation at any load. The tri-fuel delivery allows instantaneous switching from LFO to HFO as well. Fuel flexibility was a major factor in the selection of Wärtsilä multi-fuel engine technology to help solve energy supply problems in Jordan. The 573 MW IPP3 plant, comprised of 38 Wärtsilä 50DF engines that can utilize natural gas, LFO and HFO is the largest tri-fuel power plant in the world, providing Jordan with dependable power.

Wärtsilä 32GD and 46GD engines employ a diesel process whether operating on either gas or liquid fuels, and can burn natural gas, associated gas, LFO, HFO and crude oil. Ignition of liquid pilot fuel prior to gas injection makes Wärtsilä GD engines very tolerant of low gas quality and insensitive to methane number, which is a measure of the fuel’s resistance to engine knock. In addition to being able to switch instantly to fuel oil operation, Wärtsilä GD engines are also able to operate in fuel sharing mode burning varying percentages of gaseous and liquid fuels simultaneously. Wärtsilä GD engines can operate in fuel sharing mode at loads of 30 – 100%.

While gas turbines require about 10 minutes to switchover from baseload gas to fuel oil, Wärtsilä multi-fuel engines can switch from natural gas to fuel oil instantaneously. Switching back to gas from liquid fuel takes approximately 90 seconds for both Wärtsilä DF and GD engines with no load reduction. As shown in Table 1 below, Wärtsilä multi-fuel engines offer numerous advantages over gas turbines for flexible fuel solutions including the ability to operate on a wide range of fuels without sacrificing power plant availability or incurring additional maintenance costs. This fuel flexibility provides cost savings because a Wärtsilä power plant can ensure a secure power supply as fuel supplies change over time.


Table 1. Fuel Flexibility of Wärtsilä Engines Compared to Gas Turbines 


Fuel flexibility characteristic Wärtsilä DF engines Wärtsilä GD engines Gas turbines
Ability to run on natural gas, crude, HFO and LFO

Instantaneous switchoverfrom gas to fuel oil

Switch fuels while maintaining full load

Insensitive to metals and salts in fuel oils

No increased maintenance needs when running on fuel oil

Fuel sharing operation



For more information, please contact:

Jaime López
Digital & Content Marketing Specialist
Wärtsilä Finland Oy
+358 45 350 2277